Filament Labels

Brand, type, color. Ready for your next spool.

2 × 1 in labels

Select filament

Common Bambu families fill automatically. For the exact color, select that color and spool/refill option in the store, then paste its link including ?variant=… here. Verify the link before printing.

Choose your printer in the print dialog. ZPL downloads are for Zebra roll printers only.

Select a filament and add it to the list. Repeat for each different label, then print them together. The list stays on this page until you clear it or reload.

Label preview

Enlarged · black & white
2 inches wide × 1 inch tall

Printer setup

  1. Choose the matching print format above and select your printer in the dialog.
  2. For Zebra rolls, choose 2 × 1 inches. For Spartan R005 sheets, choose US Letter, portrait.
  3. Use 100% / Actual size, no margins, and turn off headers and footers.
  4. Leave dialog copies at 1; the app creates your chosen number of labels.

For Zebra rolls, the width should be 2 inches and the feed length 1 inch. If your roll feeds the other way, choose the matching orientation in the Zebra driver. For sheet labels, print on plain paper first and compare against a label sheet to check alignment.

Catalog information

4,741 entries. Updated 2026-10-06. You can also enter a custom filament.

Bambu Studio · SpoolmanDB (MIT)